New MEGA Clearance Sale Shop Now

Edelbrock VRS-4150 Race & Performance Carburetor 850 CFM PN 1308 std finish

$957.95
Edelbrock VRS-4150 Race & Performance Carburetor #1308 is race ready with four circuit billet metering blocks for full tuning capability and street friendly with a universal fit throttle arm, vacuum fittings and provisions for a TPS sensor.
TEMPORARILY OUT OF STOCK
SKU
1308
Edelbrock VRS-4150 Race & Performance Carburetor #1308 is race ready and street friendly. The one-piece, 3.75 inch tall aluminum body is a direct fit on all 4150 and 4500 carb flange manifolds. Annular boosters provide superior air-fuel mixing for great performance. VRS carbs offer convenient features usually not found in a race capable carburetor, such as a throttle arm that includes all the popular trans kickdown take-off points, four various sized vacuum tubes, and built-in provisions for a GM three-wire TPS. Performance features include 20% larger fuel bowls with dual accelerator pump circuits and four-circuit billet metering blocks with industry standard size screw-in bleeds and jets. Easily accessed air bleeds for each fuel circuit provide a quick and easy way to fine tune any new engine component or weather condition. The fuel bowls feature internal ribs to control slosh, and a mustache shaped sculpted baffle directs incoming fuel to the sidewalls to minimize foaming. The Nitrophyl floats feature chamfered side edges to avoid shutting off the fuel flow during hard cornering. Jet extenders pass through the notched float in the secondary bowl keeping the jets covered in fuel under the hardest acceleration. Two auxiliary idle air screws allow users to change idle speed without moving the parked throttle blades away from their ideal position. The idle circuit features interchangeable jets along with mixture screws on all four corners to create a smooth, clean idle. Power valves on both primaries and secondaries allow leaner cruise and add fuel as the vacuum level drops. Dual power valve protection circuits prevent PV diaphragm damage from backfires. Also, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response on a previously loaded engine. For greater control at high RPM, the high speed/main fuel circuit is split into two bleed circuits – one each for the lower and upper sections.
More Information
Manufacturer Edelbrock
Application Universal
UPC 00085347013081
Series VRS-4150
CFM Rating 850 cfm
Choke Type N/A
Barrel Quantity 4 Barrel
Flange Type 4150 and 4500
Condition New
Material Aluminum
Bore Diameter 1.750
Marine Approved No
Main Venturi Diameter 1.425
Body Height 3.75
Gasket Or Seal Included Yes
Body Material Aluminum
Availability Note Available to Order
Warranty 12 Months
Mounting Hardware Included No
Booster Type Annular
EGR Port No
Standard Vacuum 2 - 3/8" dia. and 2- 3/16" dia
Emissions Code
Features and Benefits Annular Boosters for superior air-fuel mixing.
Large capacity baffled fuel bowls provide a constant supply of fuel.
Provisions for TPS sensor; multiple vacuum take-offs, trans kick down attachment
for easy street oriented installations.
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Finish Satin
Universal Or Specific Fit Universal