Lunati HOT Summer Deals on Valve TrainShop Now

Victor Olds 455 Intake Manifold for 455 Oldsmobile Engines

Edelbrock Victor Olds 455 Intake Manifold for 400-425-455 Big-Block Oldsmobile Engines is Designed for High-Performance Competition & Marine Engines. Accepts a 4150-Style Square-Bore Carburetor. Non-EGR.
In stock
Edelbrock Part # 2810 Victor Oldsmobile 455 drag racing intake manifold provide power levels never before available for competition single-carb 455 Olds engines. In independent flow testing, our port-matched design out-flowed the best fully ported manifolds on the market. Featuring a single-plane Air-Gap芒鈧聺 design, they are available for square-bore or 4500 Series carbs to accommodate many competition applications, and offer significant horsepower increases over existing intakes in the 4500 to 7500 rpm range. With a carb mount pad height of 8.2", this manifold stand more than three inches taller than the Edelbrock Torker manifold and incorporate a high-flow 3.4-square-inch runner. We've removed the intake bolts between the runners, thus creating a smoother airflow path for higher airflow and more power! This intake manifold features a port size and shape that has been optimized to match the flow characteristics of Edelbrock Performer RPM #60519 aluminum cylinder heads.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347028108
Series Victor
Gasket Or Seal Included No
Vehicle Model Oldsmobile
Availability Note Available to Order
Warranty 12 Months
RPM Range 3500-7500 RPM
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Installation Notes
  • For marine/competition use, contact Mondello Performance at (805) 237-8808 for correct gasket kit
  • HEI will clear.
  • Manifold height: A-8.20", B-8.20"
  • Carb recommendations: Any Carburetor class allows
  • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
  • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish Satin
Material Aluminum
Rear Maximum Height 8.200 in
Single Or Dual Plane Type Single