Stars & Stripes Sale on American-Made MuscleShop Now

Victor Musi Big-Block Chevy CNC Cylinder Head Bare

$2,020.95
Edelbrock part #61419 Victor 24 Degree CNC rectangular port bare cylinder heads are designed for use with large cubic inch and/or high air demand Big Block Chevy engines with a minimum 4.47" diameter bore.
TEMPORARILY OUT OF STOCK
SKU
61419
Edelbrock and Pat Musi Performance have combined efforts to produce the finest standard intake port location big-block Chevy head available. The Edelbrock #61419 Victor 24? CNC Bare cylinder heads feature an extra thick deck and extra material in the spring pockets for a heavy-duty casting that can be used with high-lift cam and heavy spring combinations. Edelbrock equips the complete cylinder heads with Manley dual-spring valve springs and titanium retainers good for up to .880" lift. The port designs are large oval (367 lh / 377 rh) that produce impressive flow - out-of-the-box. The exhaust port exits are raised .750" to greatly improve exhaust flow and power. Off the shelf large oval-port intakes are available through Edelbrock.

INSTALLATION NOTE:
• Bare heads will have valve guides & seats installed, but will require final sizing & a valve job to match the valves you will be using.
• Deck thickness: 9/16"
• Rocker stud diameter: 7/16"
• Pushrod diameter: 3/8" (width of slot in guide plate)
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347614196
Series Edelbrock/Musi
Grade Type Performance
Quantity Sold Individually
Guide Plate Material Hardened Steel
Horsepower 600-900 HP
Availability Note Available to Order
Warranty 12 Months
Seat Angle Exhaust 45 deg/Intake 45 deg
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Intake Runner Volume 377 cc
Material Aluminum
Push Rod Diameter 0.375 in
Rocker Stud Diameter 0.437 in
Valve Angle Exhaust 14 x 4 deg/Intake 24 x 5.5 deg