Victor Jr Small Block Chevy W/ Electronic Carb LS3/L76/L92 Intake Manifold

The Edelbrock Victor JR. LS3 #28456 intake manifold is designed for Gen IV LS engines equipped with LS3, L92 and L76 cylinder heads, this manifold is for EFI racing applications operating between 3500-7500 rpm. The Edelbrock Victor JR. LS3 #28456 intake manifold comes with an MSD #6014 Timing Control Module. This manifold uses a standard squarebore throttle body flange that is compatible with both Edelbrock EFI intake elbows with single bore 90mm throttle body or four-barrel #4150 throttle bodies. The Edelbrock Victor JR. LS3 #28456 intake has additional bosses and machining that allow for the use of fuel injectors when combined with the #3638 fuel rail kit (sold separately). The LS3, L92 and L76 all use the same cylinder head. The Edelbrock Victor JR. LS3 #28456 also features a natural aluminum finish for a classic look. For the ultimate "Made in USA" quality, every Edelbrock intake manifold is cast and machined in the USA.

Installation Notes:
• Uses LS3/L76/L92 style individual port O-ring seals GM PN19256623
• L92 heads are intended for 4.00" bores and will not work with 5.7L blocks without valve reliefs
• Manifold Dimensions: Roof to bolt centerline-1.85", Floor to bolt centerline -0.57", Hieght-2.42", Throttle body pad height 7.40"
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.