Lunati HOT Summer Deals on Valve TrainShop Now

Throttle Body #4150 For Universal 4150 Style 4-Barrel

The Edelbrock #4150 Throttle Body. Victor EFI. 4-Barrel. 4150-Style Mounting Flange. 1.75" Bores. Includes GM-Style Stepper IAC Motor. Satin Finish
The Edelbrock #4150 Victor EFI 4-Barrel Throttle Body is the perfect complement for fuel injection systems that are based on the Victor EFI line of intake manifolds. This high-quality satin-finished component is an affordably priced replacement for throttle body #3878. The Victor #4150 Throttle Body has four 1.75-inch throttle bores for a 1,000 CFM flow rating and its 4150-style base flange will fit most of the Edelbrock Victor and Pro-Flo 4 style manifolds or other similar manifolds with a 4150-style square-bore carburetor flange and standard bolt spacing. The Victor EFI Four-Barrel Throttle Body will accept a standard air cleaner with a 5-1/8-inch flange and the assembly includes a Delphi/GM 4-pin stepper-style idle air control (IAC) motor with a GM-style 3-pin throttle position sensor (TPS) and 1-bar GM MAP sensor. Included are multiple vacuum take-offs (3/8 and 1/4 at the front with 3/8, 1/4 and 3/16 at the rear, and another 3/16 on the passenger side), and a MAP sensor mounting location incorporated on the housing. Precision throttle control is provided by a progressive linkage with provisions for a 700R4-style throttle valve cable. Measurement from base flange to air cleaner flange is 2.53 inches. This Edelbrock-designed throttle body is diecast and fully machined by the supplier prior to assembly with high-quality components at the Edelbrock factory.
More Information
Manufacturer Edelbrock
Throttle Position Sensor Included Yes
Application Universal
UPC 00085347041503
Idle Air Control Motor Included Yes
Throttle Position Sensor Included Yes
Series Universal 4150 Style 4-Barrel
Idle Air Control Motor Included Yes
Gasket Or Seal Included Yes
Quantity Sold Individually
Fuel Injectors Included No
Fuel System Type Gas
Bore Diameter 1.75
Throttle Body Spacer Color N/A
Fuel System Grade All
Type 4 Barrel
Throttle Body Material Die-Cast Aluminum
Throttle Body Spacer Included No
Venturi Quantity 4
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Installation Notes
  • Please study the instructions carefully before installation. Most installations can be accomplished with common tools and procedures; however, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation, it is recommended to have the installation performed by a qualified mechanic.
Airflow Rate 1000 cfm
Finish Satin
Material Die-Cast Aluminum
Throttle Body Finish Satin
Throttle Body Type Electronic Fuel Injection