Rollin’ Thunder Camshaft Kit for Ford 351W

Edelbrock part #22815 Rollin' Thunder camshaft kit is designed for 1969-93 small-block Ford 351W V-8. This complete cam kits include an Edelbrock Rollin' Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods.
out of stock
SKU
22815
TEMPORARILY OUT OF STOCK, ORDER NOW!
$1,507.95
Rolling Thunder camshafts #22815 Camshaft, Lifter,Pushrod Kit RPM Small Block Ford 351W; are ground specifically for use with the corresponding Performer or Performer RPM manifold and cylinder heads. They are dyno-matched and street proven to work as a team; especially when part of an Edelbrock Total Power Package. However, Rolling Thunder camshaft package may also be used with other components designed to operate in a similar RPM range.
Installation Note:
• Before you begin the removal and installation process, please examine the kit for possible shipping damage. If the camshaft is damaged, contact your dealer immediately. Also, make sure you have all the recommended tools and parts as listed below. As you read through these instructions the first time, use the preparation checklist to check off the exact items you will need.
• If the air conditioning condenser needs to be removed to provide clearance for camshaft removal, have the system evacuated by an appropriate repair facility BEFORE starting the installation. The facility can recharge the system after installation.
• A complete step-by-step procedure manual would require many pages. If you are a novice or just learning to work on automotive engines, we recommend consulting either Chilton or Motors automotive manuals before you begin. You may also contact an experienced mechanic.
• Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty. Refer to Edelbrock catalog for each camshaft's specific application coverage.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347228157
Grade Type PERFORMANCE
Camshaft Material Iron
Valve Springs Required Yes
Assembly Lubricant Included Yes
Availability Note Available to Order
Warranty 12 Months
Emissions Code 5
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Intake Valve Lift with Factory Rocker Arm Ratio 0.462 in
Length 20.4375 in
Lifter Type Roller
Write Your Own Review
You're reviewing:Rollin’ Thunder Camshaft Kit for Ford 351W