Stars & Stripes Sale on American-Made MuscleShop Now

Performer Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet

$1,035.50
The Edelbrock #60329 Performer Cylinder Heads are designed for use with 1965-95 289, 302 & 351W engines. The Edelbrock Performer heads are perfect for street performance, daily drivers and muscle cars where more performance is needed.
TEMPORARILY OUT OF STOCK
SKU
60329
The Edelbrock #60329 Performer Cylinder Heads are designed for use with 1965-95 289, 302 & 351W c.i.d. engine applications. These Edelbrock Performer Series Cylinder heads are 50-state street legal and provide outstanding performance from Idle-5,500 RPM's. The Edelbrock Performer heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. They also feature the highest quality intake and exhaust valves and valve springs.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347603299
Series Performer
Quantity Sold Individually
Guide Plate Material Hardened Steel
Camshaft Type Flat Tappet
Horsepower 300-450 HP
Availability Note Available to Order
Warranty 12 Months
Seat Angle Exhaust 45 deg/Intake 45 deg
Emissions Code
EO Number: D-215-94
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • EQUIPPED WITH SPRINGS FOR USE IN MECHANICAL FLAT TAPPET AND HYDRAULIC ROLLER CAMSHAFT APPLICATIONS
  • 1.90" intake valves are for use with stock pistons
  • Will not accept rail rockers
  • 289-302 V8's require head bolt bushing #9680 and either head bolt kit #8552 (7/16") or stock bolts
  • Hardened pushrods required, use Edelbrock #9632 (flat tappet only).
  • Match with Edelbrock head gasket sets.
  • Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
Intake Valve Diameter 1.90 in
Intake Runner Volume 170 cc
Material Aluminum
Push Rod Diameter (Suggested) 0.3125 in
Rocker Stud Diameter 0.375 in
Valve Angle 20 deg
Valve Spring Diameter 1.46 in
Valve Spring Maximum Lift 0.575 in
Valve Stem Diameter 0.3438 in