Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8

Edelbrock part #7167 Performer RPM Camshaft is designed for Ford 429-460 V-8 applications. This Edelbrock cam kit produced 506 HP & 536 ft-lbs. of torque when used with #7166 intake and #60669 cylinder heads on a 460 engine.
out of stock
SKU
7167
TEMPORARILY OUT OF STOCK, ORDER NOW!
$423.95
The Edelbrock #7167 Performer RPM Camshaft is designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. In the manifold section you'll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.

Installation Notes:
• Designed for Big-Block Ford, 429/460, V8
• 506 HP & 536 ft.-lbs. with #7166 intake & #60669 heads. Adjustable pushrods or rocker arms required.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347071678
Grade Type PERFORMANCE
Lifter Materials Hardened Steel
Computer Controlled Compatible No
Intake Duration .050 Inch Lift 234 deg
Availability Note Available to Order
Warranty 12 Months
Emissions Code 5
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Advertised Exhaust Duration 300 deg
Advertised Intake Duration 290 deg
Intake Valve Lift 0.556 in
Lifter Type Hydraulic
Lobe Separation 108 deg
Write Your Own Review
You're reviewing:Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8