Skip to the beginning of the images gallery

Performer Intake Manifold for Buick 400-455 V8, Non-EGR, Satin Finish

$540.95

Edelbrock Performer Buick 455 Intake Manifold for Buick 400-430-455 Big-Block V8 is Designed for Street Applications & Accepts OEM 4-bbl or 4150-Style Carburetors. Non-EGR.

In stock

SKU

2146

Details

Edelbrock Part # 2146 Performer Buick 455 intake manifold is designed for street 400-430-455 c.i.d. Buick V8's. Manifold not equipped with EGR. Will fit cold air induction hoods. Will not fit Buick 350. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

PRODUCT SPECS

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021468
Series	Performer
Material	Aluminum
Gasket Or Seal Included	No
Vehicle Model	Buick
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gaskets: for 1967-71, Fel-Pro # MS96005; 1972-76, Fel-Pro # MS96014 Manifold height: A-3.80", B-4.75" Carb pad height: 4.27" Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 650-800cfm Port exit dimensions: 1.14" x 2.26" # 2146 accepts divorced choke-type Quadrajet only. Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Rear Maximum Height	4.750 in
Single Or Dual Plane Type	Dual