Lunati HOT Summer Deals on Valve TrainShop Now

Performer 440 Intake Manifold for Chrysler, RB Series 413-440 Engines

Edelbrock Performer 440 Intake Manifold for Chrysler "RB" 413-426-440 V8's. Accepts OEM 4-bbl or 4150-Style Square-Bore Carburetors; Non-EGR. Works with EGR for 1972-79 440 V8s with OEM 4-bbl. carb. Will not fit 1962-64 Max Wedge Heads
In stock
Edelbrock Part # 2191 Performer 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's that measure 8.75" across block. Will not fit 1962-64 Max Wedge heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347021918
Series Performer
Gasket Or Seal Included No
Vehicle Model Chrysler
Availability Note Available to Order
Warranty 12 Months
RPM Range Idle-5500 RPM
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Installation Notes
  • Recommended intake gasket: # 7225
  • Manifold height: A-3.80", B-4.80", measured to engine block
  • Carb pad height: 4.30"
  • Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 650-800 cfm. Use # 1481 or # 1483 throttle/transmission lever kit.
  • Port exit dimensions: 1.12" x 2.14"
  • May require different EGR valve, see installation instructions
  • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
  • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish Satin
Material Aluminum
Rear Maximum Height 4.800 in
Single Or Dual Plane Type Dual